Inflatable camping tents

Make camp feel like home

Senleeto builds inflatable air-beam tents for family car camping — cabins, A-frames and domes with stove jack and A/C port options that pitch with a hand pump in about 5–10 minutes.

Spacious air-beam tents that inflate with a hand pump in about 5–10 minutes

Ships from U.S. warehouses · 1-year warranty · 30-day returns — see policy

AIR-BEAM FRAME — NO POLES TO THREAD BASE PITCHES IN 5–10 MINUTES HAND PUMP INCLUDED ZIP-ON AWNING & RAINFLY OPTIONS EXTENSION CANOPY UP TO 258 SQ FT CABIN · A-FRAME · DOME SHIPS FROM CA & NJ
Free Shipping
Contiguous U.S. orders
30-Day Return Window
Eligibility conditions apply
1-Year Warranty
Manufacturing defects covered
Email Support
U.S. team, replies in 1–2 business days
Why air tents

Air beams up front.
Room to add after.

The frame inflates instead of threading through sleeves. That gets the shell standing fast — and leaves the roofline free for an awning, rainfly or extension canopy.

No frame poles to thread

Air beams carry the load instead of a pole frame. One inflation point brings the whole shell up — nothing to sort, thread or shock-cord.

The same routine on every shape

Unfold, inflate, seal, tension. Cabin, A-frame and dome all go up the same way, so the second trip is faster than the first.

Add coverage after you pitch

Zip-on awnings, rainfly covers and extension canopies attach to the standing tent. Which ones fit depends on the model — the comparison table lists it shape by shape.

Ports where the gear goes

Sealed stove-jack and A/C pass-throughs on selected cabin, A-frame and dome models.

How it goes up
01

Spread & stake

Pick level ground, unfold the tent, and stake every floor corner before any air goes in.

02

Inflate the air frame

Connect the included hand pump at the valve and inflate until the beams feel firm and springy — usually 5–10 minutes for the base.

03

Tension & extend

Seal the valves, tension the guy lines, then zip on the rainfly, awning or extension canopy if your model takes one.

Support after the sale

Clear warranty and return terms, backed by a support team ready to help.

1-year limited warranty for manufacturing defects
Clear warranty and return terms, backed by a U.S.-based support team.
3
Shapes on one air-beam frame — cabin, A-frame and dome
5-10 min
Typical inflation time with the included hand pump
258sq ft
Covered area on the dual-extension cabin, from a 13' × 10' base
2
U.S. warehouses — California and New Jersey
Built for real camp life

The parts you
actually use

Awnings, rainflies and extension canopies aren't on every model. Here's what each one does, and which shapes take them.

Room for real furniture

Room for real furniture

Near-vertical walls mean cots, chairs and a table fit without anyone crawling. The 13' × 10' cabin gives you 129 sq ft before you add anything.

PEAK HEIGHT — 82.6 inFLOOR AREA — 129 sq ft
CABIN — SINGLE & DUAL

Extension canopy

A zip-on canopy that adds covered floor. Single extension on the 7'×10', 8'×10' and 13'×10' skylight models; the dual extension takes a 13'×10' base to 258 sq ft.

ALL THREE SHAPES

Rainfly cover

On A-frames and domes it's a dedicated piece that ships with the tent. On cabins, the extension canopy does the job — zip it flat over the shell.

Also sold on its own in four sizes.
ALL THREE SHAPES

Zip-on awning

Extends the roofline past the door so you get shade outside the entrance. A-frames and domes carry a separate awning; on cabins the extension canopy does the job in awning mode.

A-frames and domes include awning support poles.
SELECTED CABIN · A-FRAME · DOME

Stove jack & A/C port

Sealed pass-throughs for a flue or an A/C hose, placed so the sleeping area stays clear.

Check the product page for included port options.
FAQ

Common questions

No frame poles. Air beams carry the load, and one inflation point brings the shell up. A-frames and domes also come with poles for their awning.

Plan on about 5–10 minutes to inflate and tension the base tent. Adding a rainfly, awning or extension canopy takes a few minutes more.

Yes — a hand pump comes with every tent, and it's all you need to get the beams firm. If you'd rather not work for it, we sell a cordless electric pump with auto-stop separately.

It varies by shape and model. The comparison table lists it side by side. We also sell a universal rainfly cover in four sizes if yours didn't come with one.

The Oxford shell and rainfly help shed light rain when properly pitched and tensioned. Pitch on ground that drains and keep the guy lines tight.

Orders ship from our California and New Jersey warehouses. There's a 1-year limited warranty on manufacturing defects and a 30-day return window — see the policy page for eligibility and return shipping.

More questions?