4-6 Person Inflatable Cabin Tent – 8' × 10', Lightweight, Quick Inflate
- Regular price
- USD 409.00
- Sale price
- USD 409.00
- Regular price
-
USD 439.00
What's in the box
The ports and structure are part of the tent
PVC air columns
Inflatable beams instead of a pole frame — nothing to sort or thread.
86.6 in center height
Near-vertical walls and a tall ridge, so headroom holds up across the floor.
Trimmable stove jack
Trim the opening to match your stove pipe. A rain flap covers it when the stove is out. Stove not included.
A/C port
A dedicated duct opening for a portable A/C unit. Unit not included.
3-layer door and windows
Switch between airflow, mesh, and a privacy panel.
Blackout coating
A black coating on the inside of the shell cuts daylight, so the interior stays dark after sunrise.
A-Frame tent specifications
Where a spec isn't verified yet, we show “—” instead of a guess.
Up in about
5–10 minutes
Unroll, connect the included hand pump, inflate the air beams, then stake it out and tension the guy lines.
Pick the ground
Choose level ground that drains, check the wind direction, and clear sharp stones before you unfold.
Stake the floor corners
Peg every floor corner before any air goes in. This holds the footprint in shape as the beams rise.
Inflate the air beams
Connect the included hand pump and inflate the air beams in the order shown in the setup guide.
Tension the guy lines
Close the valves and even out the guy lines so the walls pull straight.
Before your first pitch
86.6 in at the center — the same height as our dual-skylight 13' × 10' cabin, on a smaller 81 sq ft floor.
One main door. It's the only size in the cabin range with a single door.
No. The tent has a trimmable stove jack and a rain flap for the opening,but the stove itself is not included.
There is a dedicated A/C port on the tent. The unit itself is not included.
The inside of the shell has a black coating that cuts daylight, so the interior stays dark after sunrise.